Drone Maintenance
1. Use a water gun to clean the front and rear covers, drone body, motors, propellers, and ESC covers to remove any residual pesticide. Then wipe them dry with a cloth.
2. Carefully check the fastening screws on the drone, motors, ESCs, and propellers. Tighten any loose screws and replace any stripped screws.
3. Replace damaged propellers and worn-out propeller clip gaskets promptly.
4. For the FP400's buckles, replace them if they are loose or deformed.
5. Manually rotate the motors. If there is any abnormal noise or difficulty in rotation, please visit the service center for inspection and repair.
6. Check the battery brackets, wheels, and silicone gaskets. Replace any damaged or missing parts promptly.
7. For drones with operations exceeding 667 hectares, inspect the tightness of the motor mounting screws, check for cracks in the propeller clips, and verify if the motor shafts are deformed.
This drone maintenance guide is used for FP series agricultural drones
IPv6 network supported
