As you prepare for your next mission with Topxgun spraying drones, take a moment to review these important guidelines for safe and effective operations:
Friendly Reminder:
1. Please avoid working in high temperature and low humidity environment.
2. Please work under Level 3 wind speed, and perform weeding operation under Level 2 wind speed.
3. Please follow the safety regulations strictly and prohibit any violation of operations.
| Effect Factors of Drone Spraying Operations | |||||||
| Factor | Effect | ||||||
| Pesticide | Choose proper type of pesticide and operate in accordance with its specifications. | ||||||
| Weather | Perform operation under Level 3 wind speed and avoid operate in high temperature and low humidity environment; perform weeding operation under Level 2 wind speed to ensure the safety of surrounding crops. |
||||||
| Operation Parameters | Set proper operating parameters such as uniformity, spray width, flow rate, etc. After parameter setting, test it in a small range. |
||||||
| Droplet Size | Thin | Around 80μm | Suitable for fruit tree operations | Disadvantages: Easy to drift and evaporate; Advantages: Strong penetration, large effective spray width |
|||
| Medium | Around 100μm | Suitable for field operations | Average drift and evaporation; Average penetration, spray width |
||||
| Thick | Around 120μm | Suitable for weeding | Advantages: Less drift and evaporate; Disadvantages: Smaller effective spray range |
||||
| Recommended Spraying Operation Parameters | |||||||
| Dosage (Liter/Mu)(1mu = 666.67m2) | <1.2 | ≥1.2 | ≥1.5 | ≥2 | ≥6 | ≥10 | |
| Speed (m/s) | 5-7 | 6-7 | 5-6 | 5-6 | 2-4 | 2-3 | |
| Spray Width (m) | 5-8 | 7-8 | 5.5-7.5 | 6~7 | 3.5-4.5 | 3-4 | |
| Height (m) | 3-3.5 | 3-3.5 | 3-3.5 | 2.5-3 | 3-4 | 3-4 | |
| Droplet Size | Medium | Medium | Medium | Thick | Thin | Thin | |
| Applicable Situation | Wheat weeding, early pest prevention, paddy field closure, etc. | Wheat weeding, broadleaf weeding of paddy fields, early pest control, paddy field closure, dwarf cotton defoliation, etc. | Cotton defoliation, high-demand pest control, etc. | Rice, wheat grass weeding, etc. | Tea tree, citrus sapling, etc. | Citrus, Apple, Cherry, etc. | |
| Notes | Pay attention to whether there is harm on crops in the downwind direction, especially weeding operation | Applicable to centrifugal nozzles, adjusted according to species, tree age, pruning, etc. | |||||
IPv6 network supported
